Choosing Soil and Leaf Litter Sampling Tools for Invertebrates
How to pick a leaf litter sieve, soil core sampler kit and soil sieve for invertebrate sampling, with a hand lens, trays and extraction gear.
Contents
- Sifting leaf litter with a mesh sieve
- Driving a soil core sampler
- Extraction, trays and sample handling
- Questions about soil and litter sampling gear
- What leaf litter sampling tools do I need to start?
- Which mesh size works for a leaf litter sieve for insects?
- What comes in a soil core sampler kit?
- Do I need a soil sieve for invertebrates as well as a litter sieve?
Choosing soil and leaf litter sampling tools for invertebrates means matching three items to your ground: a mesh sieve for leaf litter, a soil core sampler for depth, and a tray to sort what you catch. The tools decide whether tiny prairie invertebrates reach your eye intact or are crushed, lost or washed away before you can record them. This page explains what each piece of kit does, how the parts work together and what a beginner can leave out.
Sifting leaf litter with a mesh sieve
A leaf litter sieve is a shallow frame with a mesh floor that separates invertebrates from the loose litter layer. Coarse mesh lets beetles, spiders and millipedes drop through while holding back twigs and whole leaves. Fine mesh keeps small mites and springtails on the screen, but it also clogs with damp litter and slows the work. Shake a handful of litter over a white tray in bright light, then look for movement against the pale surface.
Driving a soil core sampler
A soil core sampler cuts a cylinder of ground at a known depth and lifts it out without collapsing the walls. A soil corer kit typically pairs a steel tube with a plunger, an extractor or a cutting head, and the tube diameter sets the volume of soil you handle. A soil auger turns deeper holes but mixes the layers, so use it for presence only and keep the corer for depth records. Push the tube in steadily, twist it free and lay the core on a tray before sorting.
Extraction, trays and sample handling
A Berlese funnel or Tullgren funnel drives invertebrates downward out of a litter or soil sample into a collecting jar below. Heat and drying push soil invertebrates such as mites and springtails out of the material, and a mesh floor stops the sample from falling in with them. Quadrat sampling fixes the ground area first, so the funnel catch can be compared with other plots. Label sampling bags and trays with the plot, depth and date, and keep samples cool and shaded until you sort them.
Questions about soil and litter sampling gear
What leaf litter sampling tools do I need to start?
A leaf litter sieve, a white sorting tray, forceps and a hand lens cover most beginner leaf litter sampling. Add labeled sampling bags so each catch keeps its plot and date. A Berlese funnel is useful later if you want small invertebrates to leave the litter on their own.
Which mesh size works for a leaf litter sieve for insects?
The right mesh for a leaf litter sieve depends on the smallest invertebrate you need to keep and how wet the litter is. Fine mesh holds mites and springtails but clogs quickly in damp material. Coarse mesh speeds sifting but lets small animals fall through with the fine fraction. Test two screens on the same litter before you commit.
What comes in a soil core sampler kit?
A soil core sampler kit holds a metal tube, a plunger or extractor, a cutting head and often a slide hammer or handle. The tube diameter and wall thickness set the soil volume and how much the core compresses. Check that the tube splits or the core pushes out cleanly, because a stuck core loses depth accuracy.
Do I need a soil sieve for invertebrates as well as a litter sieve?
A soil sieve for invertebrates is a separate tool from a litter sieve because soil crumbs and mineral grains behave differently from leaves. A stack of sieves with graded mesh sorts a dried soil sample into size fractions you can inspect under a lens. Drying the soil first stops fine particles from blinding the mesh.