PRAIRIE FIELD NOTES / MONTANA

Microphone Polar Patterns Explained: Cardioid vs Omnidirectional and Other Types

Learn what microphone polar patterns mean, how cardioid and omnidirectional mics differ in pickup and off-axis rejection, and where other patterns fit.

8 min read0 viewsMicrophone Polar Patterns Explained: Cardioid vs Omnidirectional and Other Types
— · 0 votes
Contents
  1. What a microphone polar pattern means
  2. How the cardioid pattern picks up sound
  3. How the omnidirectional pattern picks up sound
  4. Cardioid vs omnidirectional compared
  5. Other directional patterns to know
  6. Reading a polar chart without confusion
  7. Choosing a pattern for field recording
  8. Setup mistakes that blur the pattern
  9. Microphone polar pattern questions
  10. What is the difference between a cardioid and an omnidirectional microphone?
  11. Is a cardioid mic the same as a unidirectional mic?
  12. What do polar patterns in microphones mean?
  13. Which sounds does an omnidirectional mic pick up?
  14. What are the types of microphone polar patterns?
  15. How does off-axis rejection help in a recording?

A microphone polar pattern describes how sensitive the mic is to sound arriving from each direction. Cardioid mics pick up mostly from the front and reject the rear, while omnidirectional mics pick up evenly from every side. The choice between cardioid and omnidirectional shapes how much room sound and background noise reach your recording.

  • A polar pattern is a map of a microphone's sensitivity around its axis.
  • Cardioid favors the front and rejects sound from behind the mic.
  • Omnidirectional picks up sound from all directions with little rejection.
  • Supercardioid and hypercardioid tighten the front pickup and add a rear lobe.
  • Figure-8 bidirectional picks up front and rear while rejecting the sides.

What a microphone polar pattern means

A microphone polar pattern is a graph of how strongly the mic responds to sound from each direction. The pattern is drawn around the mic's axis, the line pointing out of its front grille. Sensitivity is highest where the curve reaches farthest from the center and lowest where the curve pinches inward.

Directivity is the quality behind every polar pattern, because a mic capsule does not respond equally to every angle. An omnidirectional capsule responds nearly equally all around, while a directional capsule favors one side. The pickup pattern you see in a spec sheet is a simplified picture of that directivity at a stated frequency.

Polar patterns matter because they decide which sounds land in your recording and which fade away. A pattern with strong off-axis rejection quiets talkers, traffic or room reflections outside its focus. A wide pattern captures the whole space around the mic instead. Reading the pattern before you place a mic saves trial and error in the field.

How the cardioid pattern picks up sound

The cardioid pattern is a unidirectional shape that picks up strongest at the front and weakest at the rear. Its name comes from the heart-like curve drawn on a polar chart. A cardioid mic is built to favor a voice or instrument placed in front of it.

Off-axis rejection is the payoff of the cardioid shape, because sound arriving from behind the mic is reduced. A monitor speaker or a second performer behind the mic therefore leaks in less. The sides still pick up sound, so placement to the left or right of the axis is softer than dead center.

Cardioid mics suit close speech, a single instrument or a stage where loudspeakers sit behind the performer. Distance still matters, since a cardioid mic loses focus as the source moves away. Keep the source near the front axis to get the rejection the pattern promises.

How the omnidirectional pattern picks up sound

The omnidirectional pattern responds to sound from every direction with nearly equal sensitivity. An omnidirectional mic has no front or rear in its pickup, so a voice sounds much the same from any side. This pattern captures the room along with the source.

Omnidirectional mics offer little off-axis rejection, which is a strength and a weakness at once. Background noise and room reflections arrive at full strength, yet the sound stays natural and free of proximity effects. A close talker does not get the boomy bass lift that a directional mic adds.

Use an omnidirectional mic when the whole space matters, such as a group around a table or a room's natural ambience. An omnidirectional pattern also handles moving sources well, because the performer can drift without falling off axis. Place it where the surrounding noise is acceptable, since the mic will capture it.

Cardioid vs omnidirectional compared

The difference between cardioid and omnidirectional mics comes down to direction and rejection. A cardioid mic focuses on the front and suppresses the rear, while an omnidirectional mic treats all directions alike. Neither pattern is better in every setting, because each trades isolation against openness.

A cardioid pattern wins when you need separation from other sound sources or loudspeakers. An omnidirectional pattern wins when you want a natural capture of a space or a moving performer. The same voice can sound tight and close on a cardioid mic and open and roomy on an omnidirectional one.

Placement changes how strongly each pattern behaves, so test both before you commit. Moving a cardioid mic closer increases isolation, and moving an omnidirectional mic closer raises the direct sound over the room. The pattern sets the direction, and the distance sets the balance.

TraitCardioidOmnidirectional
Pickup directionFront, with rear rejectionAll directions
Off-axis rejectionStrong at the rearMinimal
Room sound capturedLessMore
Good forIsolation and close speechAmbience and moving sources

Other directional patterns to know

Supercardioid and hypercardioid patterns tighten the front pickup beyond a cardioid shape. Each adds a small rear lobe, a zone behind the mic where sensitivity returns. The tighter front focus comes with that rear pickup, so aim the null zone carefully.

The figure-8 bidirectional pattern picks up from the front and the rear while rejecting the sides. Two performers facing each other across the mic can share one figure-8 capsule. The side nulls make figure-8 useful for separating sound that arrives from the left and right.

A switchable mic may offer several patterns in one body, letting you change directivity without swapping gear. Each setting keeps its own balance of front focus and rear rejection. Check the pattern switch before recording, because a stray setting changes everything.

Reading a polar chart without confusion

A polar chart plots sensitivity as distance from the center, with the mic axis pointing up the page. The outer ring marks full sensitivity and the center marks a null, where sound is rejected. A cardioid curve bulges toward the top and pinches at the bottom.

Charts are drawn for a stated frequency, so the shape shifts as pitch changes. Low frequencies tend to spread wider and reduce the sharpness of any pattern. Treat the chart as a guide to direction rather than an exact promise at every note.

Compare charts by looking at where each curve reaches the outer ring and where it dips toward the center. A deep dip marks a null worth aiming at a noise source. A wide bulge marks the zone where the source should sit.

Choosing a pattern for field recording

Choose the pattern from the job the mic must do, not from habit. A cardioid mic serves a single voice in a noisy space, and an omnidirectional mic serves a whole scene. Match the directivity to the source before you worry about other specs.

Aim a directional mic so its null points at the loudest unwanted sound. Place an omnidirectional mic where the surrounding noise is part of the recording you want. Walk the space and listen before you lock the mic in place.

Test the pattern outdoors where wind and wildlife add sound you cannot control. A directional pattern reduces distant noise, yet it also colors the sound arriving off axis. A natural outdoor capture may call for an omnidirectional mic and a sheltered position.

  • Pick cardioid for one voice and rear noise rejection.
  • Pick omnidirectional for a whole room or a moving source.
  • Pick supercardioid or hypercardioid for a tighter front focus.
  • Pick figure-8 for two sources facing each other.
  • Point a null at the loudest unwanted sound.

Setup mistakes that blur the pattern

A polar pattern only holds if the mic points where you intend. Angling a cardioid mic away from the source pushes the voice into a softer zone. Check the axis and the null direction before every take.

Distance erodes directionality, because the room sound grows relative to the direct sound. A cardioid mic far from a voice behaves less like a spotlight. Move the mic closer to restore the separation the pattern provides.

Handling noise and wind can mask the pattern's benefits, so mount the mic on a shock mount and shield it. Reflections from a nearby wall arrive off axis and color any directional pickup. Treat the room as part of the recording setup, not an afterthought.

Microphone polar pattern questions

What is the difference between a cardioid and an omnidirectional microphone?

A cardioid microphone picks up sound mainly from the front and rejects the rear, while an omnidirectional microphone picks up sound from every direction. The cardioid pattern gives isolation from behind the mic, and the omnidirectional pattern captures the whole space. Your choice depends on whether you need separation or a natural room sound.

Is a cardioid mic the same as a unidirectional mic?

No, cardioid is one kind of unidirectional pattern rather than a synonym for every directional mic. A unidirectional mic favors one direction, and cardioid, supercardioid and hypercardioid all belong to that family. Each unidirectional type differs in how tightly it focuses and where it rejects sound.

What do polar patterns in microphones mean?

Polar patterns in microphones describe how sensitive the capsule is to sound arriving from each direction. The pattern is drawn as a curve around the mic axis, with high sensitivity where the curve extends outward. Reading that curve tells you where to place a source and where to aim a null.

Which sounds does an omnidirectional mic pick up?

An omnidirectional mic picks up sound from all directions with nearly equal strength. That includes the voice you want, the room reflections and any background noise nearby. Its broad pickup makes it suited to ambience and group capture rather than tight isolation.

What are the types of microphone polar patterns?

The types of microphone polar patterns include omnidirectional, cardioid, supercardioid, hypercardioid and figure-8 bidirectional. Omnidirectional picks up all around, and cardioid favors the front. Supercardioid and hypercardioid tighten the front focus, while figure-8 picks up front and rear.

How does off-axis rejection help in a recording?

Off-axis rejection reduces sound that arrives outside a mic's intended direction, such as a speaker behind a cardioid mic. That rejection keeps unwanted noise and reflections lower in the mix. A pattern with a deep null lets you point that quiet zone at the loudest distraction.

Latest articles