How to Wear a Wide Brim Hat
Learn how to wear a wide brim hat with the right fit, brim adjustment, chin cord use and sun cover, so your head stays shaded and your view stays clear.
Contents
- Start with fit and sizing
- Position the brim for sun cover
- Shape and adjust the brim
- Set up the chin cord for wind
- Handle wind and movement
- Keep the view clear while birding
- Care for the hat through the season
- Wide Brim Hat Questions
- How do I keep a wide brim hat from blowing off?
- Where should a wide brim hat sit on my head?
- Can I bend the brim without damaging the hat?
- What kind of hat works for birdwatching?
- How should I store a wide brim hat between trips?
Wearing a wide brim hat well comes down to fit, position and a secured brim. Set the hat level and low enough to shade your eyes, size it so it stays put in wind, and use a chin cord when gusts pick up. A steady hat keeps your hands free for binoculars on the prairie.
- Seat the hat level with the brim just above your eyebrows so shade reaches your eyes without blocking the view.
- Choose a fit that grips gently at the forehead; a loose hat lifts in wind and a tight one presses on your head.
- Set the front brim slightly downward for glare and keep side brims level so your peripheral view stays open.
- Clip a chin cord behind your head on calm days and under the chin when wind builds on open ground.
- Lift the brim with a finger when you scan low for ground birds instead of tipping the whole hat.
Start with fit and sizing
Hat fit and sizing decide whether a wide brim hat stays useful through a long morning outdoors. Measure around your head above the ears and across the forehead, then compare that number with the maker's size chart. A hat that sits with slight contact all around the head sits correctly.
Too loose a hat slides down over the eyes or lifts off in wind, and too tight a hat leaves red marks and a headache. Try the hat on with your hair as you wear it in the field. Shake your head gently to test whether the hat stays in place.
Many cloth and straw hats carry an internal band or a drawstring to fine-tune the fit. Tighten the band until the hat holds steady without pressure, then loosen it a notch if you feel a pulse at the temples. Adjust again when you add a sun hood or a head net.
Position the brim for sun cover
Hat positioning for sun cover means balancing shade against a clear view of the horizon and the ground. Set the hat level and bring it down until the front brim shades your eyes in the direction you face. The brim should not rest on your ears or press into your forehead.
Pull the front brim a little lower when the sun sits ahead of you and glare comes off pale grass or water. Keep the side brims level rather than flared down, so your peripheral vision stays open for movement. Check that the back brim does not touch your collar when you raise your head.
Binoculars work best when the brim sits just above the eyecups and does not knock them. Test the position by raising your binoculars and tilting your head as you would on a bird. A hat worn too low blocks the upper field and forces you to duck your head to see.
Shape and adjust the brim
Adjusting hat brim shape lets you trade shade for visibility as light and terrain change. Most brims bend by hand along the crown, and felt and straw hold a curve while soft cloth returns to its shape. Work the brim gently in small steps and check the result in shade.
Curve the front brim downward for low sun and flatten it when you scan a wide sky for raptors. Sweep the sides gently upward so wind passes over the brim instead of lifting it. Leave the back brim as it came unless glare from behind bothers your neck.
Repeated bending along one line can crease or crack a stiff brim, so spread the pressure across the width. Store the hat on a flat surface or a hat form so the brim keeps its curve. Wipe dust with a soft brush rather than wetting the brim, which can soften a shaped edge.
- Curve the front brim down slightly for low sun ahead.
- Flatten the front brim when scanning open sky.
- Sweep the side brims up so wind flows over them.
- Bend the brim in small steps, spreading pressure across its width.
- Store the hat on a flat form to protect the curve.
Set up the chin cord for wind
A chin cord turns a wide brim hat into gear that survives gusts on open prairie ground. Wind and brim interact strongly, because a wide surface catches air and can lift the hat off your head. A cord holds the hat on while your hands stay on binoculars or a notebook.
On calm days, run the cord behind your head so it stays out of your face and ready to pull forward. When wind builds, bring the cord under your chin and slide the toggle until it holds without pressing your throat. Tuck long cord ends away so they do not tangle in straps or lenses.
Some hats use a stampede string that passes behind the head and tightens at the back of the crown. Others use a cord with a sliding bead under the chin. Test the setting by tilting your head down and letting the wind push the brim; tighten if the hat shifts.
Handle wind and movement
Wind control starts before the gust arrives, so watch grass, feathers and distant dust for signs of rising air. Turn your head slowly and let the brim cut the wind rather than swatting at the hat. Keep one hand near the crown when you cross an exposed rise.
Walking into wind, tip the front brim down a little so air flows over the crown. Walking with the wind behind, a hat with a firm crown holds shape better than a soft slouch. Carry the hat by the crown when you remove it, because gripping the brim can distort its curve.
Set the hat on your lap or inside a field bag when you kneel to watch a bird low in the grass. Never leave a wide brim hat on open ground where wind can roll it away. Check the cord and band before each outing, since stretched cord or a worn toggle lets the hat go.
Keep the view clear while birding
A hat for birding should shade the face without hiding the bird, so test it with binoculars before you trust it in the field. Raise the glasses with the hat on and tilt your head through the range you use on a perched bird. Trim or reposition anything that contacts the eyecups.
Lift the front brim with a fingertip when you scan low for sparrows or shorebirds instead of pushing the whole hat back. Turn your body rather than your neck when following a bird across the sky, so the brim stays aligned with your eyes. Keep the side brims clear of the strap path so nothing catches when you raise the glasses.
A wide brim also shades the neck and ears, which matters on bright open ground. Pair the hat with a light scarf or a sun hood when glare comes from below off pale soil. Take the hat off in thick cover only if branches pull at the brim, and recheck the cord when you put it back on.
Care for the hat through the season
Hat care keeps the brim firm and the fit steady across many outings. Brush dust off after each trip and let the hat air in shade rather than on a hot surface. Sweat and sun lotion collect in the band, so wipe the inner band with a damp cloth and let it dry fully.
Pack a wide brim hat flat or crown-down in a rigid container so the brim is not crushed by other gear. A soft hat can be rolled only if the maker says the material tolerates it. Check stitching on the cord and band now and then, and replace a frayed cord before wind season.
Store the hat away from heat and direct sun, which can stiffen or fade some materials. Restore a bent brim by hand in small steps rather than forcing it back in one move. A hat that no longer grips or shades the eyes needs a new band or a different size, not a tighter cord.
Wide Brim Hat Questions
How do I keep a wide brim hat from blowing off?
A chin cord is the main tool for keeping a wide brim hat on in wind. Run the cord behind your head in calm air, then bring it under the chin and tighten the toggle when gusts rise. A snug internal band also helps, since a loose hat lifts before the cord takes load.
Where should a wide brim hat sit on my head?
A wide brim hat sits level, low enough that the front brim shades your eyes and high enough that it does not rest on your ears. The band should touch gently all around without pressing the temples. Check the position with binoculars raised, since the brim must clear the eyecups.
Can I bend the brim without damaging the hat?
You can adjust the brim of most wide brim hats by hand, but bend gently in small steps. Felt and straw hold a curve, and soft cloth springs back, so spread pressure across the width to avoid a crease. Leave stiff or treated brims alone and follow the maker's guidance.
What kind of hat works for birdwatching?
A hat for birding should shade the eyes, stay steady in wind and clear the binocular eyecups. A wide brim with a firm crown and a chin cord suits open prairie ground, where sun and wind both arrive. Test the hat with your glasses raised before you count on it.
How should I store a wide brim hat between trips?
Store a wide brim hat flat or crown-down in a rigid container so the brim keeps its shape. Keep it away from heat and direct sun, which can stiffen or fade some materials. Let a damp hat dry in shade before packing it away.