PRAIRIE FIELD NOTES / MONTANA

How to Make a Distribution Map

A practical walkthrough for drawing a species distribution map: collecting presence records, plotting occurrence points, choosing a projection, and labeling the range map.

8 min read0 viewsHow to Make a Distribution Map
— · 0 votes
Contents
  1. Decide what the map must show
  2. Collect presence records from reliable sources
  3. Choose a base map and projection
  4. Plot occurrence points on the map
  5. Draw the species range boundary
  6. Build the legend and labels
  7. Check the map before you share it
  8. Questions About Drawing Range Maps
  9. How do I draw a distribution map by hand?
  10. What is the difference between a distribution map and a range map?
  11. How many presence records do I need for a range map?
  12. Should a range map show absence records too?
  13. What belongs in the legend of a distribution map?
  14. Why does the projection change the shape of a range map?

Making a distribution map means plotting where a species has been recorded, then drawing a boundary that shows its species range. You gather presence records as occurrence points, place them on a base map at a stated scale, and mark the area the records support. The result is a range map that a reader can interpret without asking you questions.

  • A distribution map shows recorded places, while a range map adds an interpreted boundary around them.
  • Presence records are the raw material, so note the source and date of each record.
  • A map legend must name the symbols, the boundary type and the time window the records cover.
  • Plot occurrence points before drawing any outline, so the boundary follows evidence rather than expectation.
  • State the scale and the projection, because a boundary looks different on each one.

Decide what the map must show

A distribution map answers a question about where a species has been found, so define that question before drawing. A map for a field notebook may show one season of sightings, while a map for a report may show every record held for a region. The answer sets how much data you need and how precise the boundary can be.

Decide whether the map shows presence only or presence and absence. Presence-only maps plot occurrence points where the species was detected and leave blank space unexplained. Maps that include absence carry a stronger claim, because a blank cell then means a survey found nothing there.

Choose the area the map covers, called the extent, and keep it tighter than the whole continent unless the species truly spans it. An extent slightly larger than the known records leaves room for the boundary and for a legend. Write the extent and the time window down before you start, so the finished map can state them.

Collect presence records from reliable sources

Presence records are the observations that place a species at a point in space and time, and they are the foundation of any distribution map. Each record needs a location precise enough for the map scale, a date, and a note on who identified the species. Records without those details weaken the boundary you draw from them.

Field notebooks, survey sheets and museum or herbarium labels are the sources a mapper works from. Copy each record onto one line with its coordinates or a place description, its date, and its source. Keep the original wording as well, because a place name you cannot resolve later is a record you cannot plot.

Screen the records before plotting, and set aside any that fall far outside the expected region until you can check them. A misplaced record can pull a boundary across an entire landscape. Note every record you exclude and the reason, so the map remains honest about what it left out.

Choose a base map and projection

A base map supplies the coastlines, rivers and grid lines that let a reader locate the occurrence points. Choose a base that matches the extent and carries a scale bar and a north arrow. A base with too much detail clutters a small map, and a base with too little hides the landmarks a reader needs.

The projection is the method that flattens the curved surface of the earth onto paper, and it changes the shape of a boundary. A projection that preserves area suits a range map that shows how much ground a species occupies. A projection that preserves shape suits a map read for direction and outline.

State the projection and the scale in a corner of the map, because a boundary drawn on one projection does not transfer cleanly to another. A graticule of latitude and longitude lines helps a reader place the map on the globe. Keep the base map faint behind the records, so the species data stays the strongest element.

Plot occurrence points on the map

Occurrence points are the plotted positions of your presence records, and they should go down before any outline. Convert each location to the coordinates of the chosen projection and mark it with a small, uniform symbol. A dot the size of a pinhead keeps dense clusters readable, while a large blob merges separate records into one smear.

Group the points by a feature that matters, such as season or record source, and give each group its own symbol. Distinct symbols let a reader see that a cluster comes from one survey rather than from steady occupation. A map legend then explains each symbol in one line.

Check for points that sit in open water, on a road or beyond the map frame, and trace each one back to its record. Overlapping points at the same location hide how many records sit there, so note the count in the legend or offset the symbols slightly. A plotted point that cannot be traced to a record should come off the map.

Draw the species range boundary

The species range is the area you claim the species occupies, and the boundary is your interpretation of the records. Draw the outline around clusters of occurrence points, then decide how to treat the gaps between them. A boundary that encloses every point tightly suggests precision the records may not support.

Two honest approaches exist for the outline. A convex hull wraps all points in the smallest enclosing shape, which overstates the range where records follow a curved river or ridge. A hand-drawn boundary that follows habitat edges and leaves obvious gaps unshaded reflects the mapper's judgment and should be labeled as such.

Separate confirmed range from possible range with two line styles, such as a solid line for records and a dashed line for inferred edges. A shaded fill inside the boundary helps a reader see the area at a glance, and a lighter tint keeps the points visible beneath it. Label the boundary type in the legend so no reader mistakes inference for evidence.

Build the legend and labels

A map legend is the key that translates every symbol, line style and tint on the map into plain words. The legend names the symbol for occurrence points, the boundary styles, and the meaning of any shaded fill. A reader should never need to guess what a mark means.

Place the legend in a clear corner of the map and order its entries from the data to the interpretation. Give the map a title that names the species and the region, and add the time window the records cover. A short note on the data source belongs beside the legend, in small type.

Labels on the map itself should stay few and legible, naming regions, rivers or landmarks that help orientation. Keep label text horizontal where possible, and avoid placing type over the occurrence points. A scale bar, a north arrow and a projection note complete the frame around the map.

Check the map before you share it

A finished distribution map deserves a check against the records it came from, before anyone else reads it. Compare the boundary with the plotted points and confirm that no point sits outside an area the legend calls confirmed. Confirm that each symbol in the drawing appears in the legend and each legend entry appears on the map.

Ask a reader who did not build the map to describe what it shows, and listen for the interpretation you intended. Misread boundaries and missing labels surface quickly in that test. Correct the map rather than explaining it in conversation, because the map travels without you.

Record which version of the map you shared and which records it used, so a later update can be traced. A map built from presence records can change when new records arrive, and a dated note keeps old copies understandable. Store the record table with the map file for the same reason.

Questions About Drawing Range Maps

How do I draw a distribution map by hand?

Drawing a distribution map by hand starts with a printed base map and a table of presence records. Mark each occurrence point with a small pencil dot, then sketch the range boundary around the clusters and ink the final lines. A hand-drawn map needs the same legend, scale and projection note as a digital one.

What is the difference between a distribution map and a range map?

A distribution map plots where records of a species were made, and a range map adds an interpreted boundary around those records. The distribution map stays close to the evidence, while the range map states a claim about the area the species occupies. Many finished maps combine both, with points inside a shaded range.

How many presence records do I need for a range map?

The number of presence records a range map needs depends on the size of the area and how thoroughly it has been surveyed. A small region with repeat visits supports a boundary from fewer records than a vast landscape with scattered visits. Spread of records across the area matters as much as the count.

Should a range map show absence records too?

A range map can show absence records when surveys deliberately looked for the species and found none. Absence records sharpen a boundary, because a blank area then means a checked area rather than an unvisited one. Without survey effort behind them, absence records mean little.

What belongs in the legend of a distribution map?

The legend of a distribution map names every symbol, line style and tint used in the drawing. It explains the occurrence point symbols, the boundary styles for confirmed and inferred range, and the meaning of any shaded fill. The legend also carries the time window and the data source.

Why does the projection change the shape of a range map?

The projection changes the shape of a range map because flattening the curved earth distorts area, shape or distance. The same boundary drawn on two projections can look stretched in one direction and compressed in another. Naming the projection lets a reader compare your map with others.

Read next

Latest articles