# Types of Birdhouses for Different Birds

Match birdhouse types to the birds that use them: entrance and floor dimensions, mounting height, predator guards and box care for cavity nesters.

Birdhouses differ by the bird they serve, and the key differences are the entrance hole size, the floor space and how high the box sits. Cavity-nesting birds such as bluebirds, wrens, chickadees and swallows each need a nest box built to their own measurements. A box with the wrong hole either keeps the right bird out or lets a larger bird take it over. 

- Match the entrance hole to the bird: a hole too large lets starlings and house sparrows move in.
- Floor dimensions set the brood space, so a wide floor suits larger nesters and a small floor suits chickadees.
- Mount boxes on a pole or post with a predator guard rather than on a tree that predators can climb.
- Face the entrance away from prevailing wind and add a few drainage holes in the floor.
- Clean out old nesting material after the season and check the box before the next nesting attempt.
 

## Why nest box design follows the species 

Nest box design by species matters because each cavity nester has its own body size and brood size. A bird selects a cavity that fits its body and holds its clutch of eggs. A box built for one species often excludes another, which is the point of matching the design to the bird. 

Entrance and floor dimensions are the two measurements that do the work. The hole admits the bird and blocks larger competitors. The floor gives the nest room without leaving excess space that a bigger bird can exploit. 

Cavity-nesting birds include bluebirds, wrens, chickadees, tree swallows, nuthatches and purple martins. Woodpeckers, owls and some ducks also use cavities but need larger boxes or natural snags. Decide which bird your site can support before you build. 

## Bluebird house measurements 

A bluebird house uses a round entrance hole of about one and a half inches, which admits a bluebird and blocks a starling. For western bluebirds the hole stays close to that size, and the box works on a fence line or open grassland edge. 

The floor of a bluebird box measures roughly four by four inches, with a side wall about eight to twelve inches tall. A hinged side panel lets you monitor the nest and clean the box without taking it down. 

Eastern bluebirds nest in open country with short grass and scattered perches. Mount the box four to six feet above the ground on a metal pole, and keep brush away from the entrance so the birds have a clear approach. 

## Wren and chickadee boxes 

A wren house carries an entrance of about one and a quarter inches, which suits a house wren and shuts out larger birds. A chickadee box uses a hole near one and an eighth inches, sized to the small body of a chickadee. 

A wren floor is often four by four inches, while a chickadee floor runs about four by four inches with a shallower depth. Both species accept a box on a post or in a shaded woodland edge. 

House wrens fill a box with twigs before nesting, so leave room in the depth for that behavior. Chickadees prefer a partly shaded site and a box with a small overhang above the entrance. 

## Swallow and martin housing 

Tree swallows take a box with a hole of about one and a half inches and a floor near five by five inches. The slightly larger floor suits the swallow brood and still keeps starlings out when the hole is right. 

Purple martins nest in colonies and need a multi-compartment house or a gourd rack rather than a single box. Martin housing sits high on a pole in open sky, with compartments that each have their own entrance. 

Swallows hunt insects over open fields and water, so place their boxes near a foraging area. Pairing two boxes close together can reduce competition from a single pair of swallows, depending on the species and site. 

## Hole size keeps competitors out 

The entrance hole is the main defense against the house sparrow, which takes over boxes and can harm nesting birds. A hole sized to the target species blocks the larger body of a starling or sparrow. 

Some boxes add a metal hole reducer or a slot entrance to stop chewing and widening. A hole that has been enlarged by use or damage lets competitors in, so check the opening each season. 

Entrance shape also affects who enters. A round hole suits most songbirds, while a slot or oval entrance can serve birds that nest in crevices. 

## Mounting height and placement by bird 

Mounting height and placement decide whether a box gets used, because each species has a favored view and cover. Bluebird and swallow boxes sit low on a pole in open ground, and chickadee and wren boxes sit at woodland edges. 

Face the entrance away from the wind and toward open space for a clear flight path. Space boxes apart so pairs do not crowd each other, and keep a box away from dense brush where predators hide. 

A guard on the pole below the box stops climbing predators, and a baffle above the box deters some aerial raiders. Where a job involves climbing or power lines, call a trained specialist rather than risk a fall. 

## Materials and drainage for nest boxes 

A nest box needs thickness for insulation, so wood boards of about three quarter inch or more hold warmth in cool weather. Untreated wood breathes and sheds moisture, and it avoids the heat and condensation of thin metal. 

Drainage holes in the floor and ventilation gaps near the top keep the nest dry and cool. A roof overhang sheds rain away from the entrance, and a rough interior below the hole gives nestlings a grip to climb out. 

Avoid paint or stain inside the box, and use a water-based finish outside if you want one. Clean out old material after the nesting season and let the box dry before you close it again. 

- Floor drainage holes let water escape
- Upper ventilation gaps release heat
- Roof overhang sheds rain from the entrance
- Rough interior below the hole helps nestlings climb
- Hinged panel opens for cleaning and checks
 

## Sparrow control and box care 

House sparrows take over boxes even when the hole size is right, so monitor each box and remove sparrow nests when you find them. Block the entrance while a box is empty if sparrows keep returning. 

Clean the box after each nesting attempt and inspect the joints for rot or loose screws. Repair a cracked side or a worn hole before the next season starts. 

Record what nests where, which helps you decide whether to add a box for another species. Track cleaning dates and repairs so the box stays sound for years. 

## Birdhouse questions for different birds 

### What size hole should a birdhouse have? 

The entrance hole size depends on the target bird. A chickadee box uses a hole near one and an eighth inches, a wren house about one and a quarter inches, and a bluebird or swallow box about one and a half inches. Match the hole to the bird so larger competitors cannot enter. 

### Why does a birdhouse need a specific floor size? 

Floor space sets how much room a clutch has to grow. A small floor suits a chickadee, while a five by five inch floor serves a tree swallow brood better. A floor that is too large can invite a bigger bird to take the box. 

### Do different birds need different box heights? 

Yes, mounting height varies by species and site. Bluebird and swallow boxes sit four to six feet up in open ground, and chickadee and wren boxes sit at shaded woodland edges. Face the entrance away from prevailing wind. 

### How do I keep house sparrows out of a birdhouse? 

A hole matched to the target species blocks a sparrow's larger body, but house sparrows can still take over a box. Monitor the box during the season and remove sparrow nests when you find them. Block the entrance while the box is empty if sparrows keep returning. 

### Can I put a birdhouse on a tree? 

A pole or post with a predator guard is a safer mount than a tree trunk. Predators can climb a tree to reach a box, and a guard below the box stops them. Place the box where the bird has a clear flight path to the entrance. 

### When should I clean a birdhouse? 

Clean the box after the nesting season ends and before the next attempt begins. Remove old nesting material, check the floor drainage holes, and repair any loose joints. Record the date so you can repeat the task each year.
