# Sprayer Calibration: Formula, Calculator, Chart and Worksheet

Learn sprayer calibration with the formula, a calculator method, a chart and a worksheet so you can set gallons per acre or litres per hectare correctly.

Sprayer calibration is the process of measuring what your nozzles actually put out and adjusting pressure or speed to hit a target rate. This page gives the calibration formula, how to use a calculator or an app, a chart for reading results and a worksheet for recording a catch test. It covers gallons per acre and litres per hectare, nozzle size and pressure, boom width and travel speed. 

## The calibration formula in gallons per acre 

The calibration formula multiplies nozzle output in gallons per minute by a constant and divides by boom width times travel speed. Gallons per acre equals 5,940 times gallons per minute, divided by the product of nozzle spacing in inches and speed in miles per hour. Measure spray output per nozzle with a catch test, then compare the result to your label rate. The formula describes the sprayer as it runs today, so recheck after any nozzle change. 

## Converting the formula to metric units 

Sprayer calibration formula metric versions use litres per hectare and replace the constant with a metric one. Litres per hectare equals 600 times nozzle output in litres per minute, divided by nozzle spacing in meters times speed in kilometers per hour. Metric conversion starts with measuring spacing and speed in the same units the formula expects. Mixing units is the main source of error, so write each measurement down before calculating. 

## Building a worksheet and chart 

A sprayer calibration worksheet records nozzle output, boom width, travel speed and the calculated rate so a pass can be repeated. A calibration chart lists nozzle output against speed for your boom, letting you read a needed pressure without recalculating. A calibration app or calculator does the same arithmetic on a phone, but you still collect the catch test numbers by hand. Keep the sheet with the sprayer so the next operator can match the setting. 

## Sprayer Calibration Questions 

### How do you calibrate a sprayer for gallons per acre? 

Calibrating a sprayer for gallons per acre means catching spray from one nozzle for a set time and measuring it. You then enter gallons per minute, nozzle spacing and travel speed into the formula. Adjust pressure or speed until the result matches the label rate. Repeat the catch test to confirm the new setting. 

### What is the sprayer calibration formula? 

The sprayer calibration formula relates nozzle flow, spacing and speed to the applied rate. In US units it is gallons per acre equals 5,940 times gallons per minute divided by spacing inches times miles per hour. The metric form uses 600 times litres per minute divided by spacing meters times kilometers per hour. Both forms give the sprayer calculation formula for output per area. 

### Can a sprayer calibration calculator or app replace the catch test? 

A sprayer calibration calculator or app handles the arithmetic but cannot replace the catch test. You still need to measure spray output per nozzle with a measuring cup and time the flow. The calculator then converts nozzle output and travel speed into a rate. A calibration app is convenient for field notes and repeat settings. 

### How do nozzle size and pressure affect spray output? 

Nozzle size and pressure set the spray output per nozzle, and output rises as pressure rises. Doubling pressure raises flow by about forty percent, not double, so read the nozzle chart. Choose nozzle size from the target rate and speed, then fine tune with pressure. Wear changes nozzle flow rate calculation, so replace worn tips before calibrating.
