# Silt Fence Materials: What Silt Fence Is Made Of

Learn what silt fence is made of, from geotextile fabric and polypropylene weave to wood stakes, metal posts and wire backing for erosion control.

Silt fence materials are the fabric and posts that form a sediment barrier on a construction site. The fabric is a geotextile, often a polypropylene woven fabric that lets water pass while holding soil in place. Wood stakes or metal posts hold the fabric upright, and wire backing supports it where the load is heavy. This page explains each material and what it does in construction erosion control. 

## The fabric is a geotextile 

Silt fence fabric is a geotextile made to filter muddy runoff rather than block it completely. Polypropylene woven fabric gives the sheet its strength and keeps the weave stable when wet. Water seeps through the small openings while soil particles collect against the fabric. A nonwoven geotextile is also used where fine sediment must be trapped. 

## Posts hold the fabric upright 

Wood stakes drive into the ground and keep the fabric standing along the line. Metal posts are an alternative where the ground is hard or the fence must stay in place longer. Spacing between posts depends on the site slope and the expected water flow. Fabric fastens to each post so the sheet cannot sag between supports. 

## Wire backing adds support 

Wire backing is a mesh that runs behind the fabric on heavier installations. The wire carries part of the soil and water load so the fabric does not tear away from the posts. A silt fence works as a sediment barrier only when the fabric, posts and backing act together. Installers set the fabric in a trench and pack soil against the base to stop water passing underneath. 

## Questions about silt fence materials 

### What is silt fence made of? 

Silt fence is made of a geotextile fabric stretched along wood stakes or metal posts. Polypropylene woven fabric is the sheet material that filters runoff and holds soil. Wire backing supports the fabric on heavier jobs. The fabric is buried at the base to seal the barrier. 

### What are silt fence materials on a construction site? 

Silt fence materials are the filter fabric, the stakes or posts and any wire backing used together. These parts form a sediment barrier for construction erosion control. Each material has a job, and the fence fails if one part is missing or poorly set. A trained installer decides the layout for a given site. 

### Is silt fence fabric the same as geotextile fabric? 

Yes, silt fence fabric is a type of geotextile fabric. The fabric is woven or nonwoven and designed to pass water while trapping soil. Polypropylene woven fabric is one form used for silt fence. The grade of geotextile depends on the soil and the expected flow. 

### Do silt fences use wood stakes or metal posts? 

Silt fences can use either wood stakes or metal posts. Wood stakes suit many short-term installations and drive easily into soft ground. Metal posts hold better in hard ground or where the fence must stay longer. The choice depends on soil, slope and how long the barrier is needed.
