# Making a DIY Insect Screen for Windows

A plain guide to building your own insect screen for windows: measuring the opening, choosing mesh, fitting a frame, and sealing the edges.

Making a DIY insect screen for windows lets you keep the air moving while keeping biting insects outside. You measure the window opening, cut a frame or a flexible mesh panel, and fix the mesh so no gap is left at the edges. The job suits a careful home worker with simple hand tools, and the mesh choice depends on what insects you need to stop. 

## Measuring the window opening 

Measuring a window opening carefully decides whether the finished insect screen sits flush or rattles in the frame. Record the width and height at the inner stops rather than the outer casing, and check both ends for square. A window that is out of square needs a frame built to the smaller dimension, with the gap closed by weatherstrip. Note any handles or latches that the mesh must clear. 

## Choosing mesh and frame materials 

Fiberglass or polyester mesh suits a window insect screen because the weave holds its shape and resists fraying when cut. Fiberglass screen mesh is stiffer and holds a flat panel well, while polyester mesh bends more easily around curves. Mesh size for mosquitoes is fine enough to block small bodies, and a tighter weave also cuts airflow. An aluminum window screen frame with corner pieces gives a rigid panel, and a magnetic screen option lets you lift the panel off without tools. 

## Fitting mesh and sealing edges 

Fitting the mesh into a window screen frame uses a spline, which is the rubber cord pressed into a groove to trap the fabric. A spline roller pushes the cord into the groove without tearing the mesh, and a dull knife trims the excess after the cord is seated. Work from one corner around the frame so the mesh stays even. Any gap at the sill or sides lets insects walk in, so close those gaps with brush strip or foam. 

## Questions about window insect screens 

### How do I make my own mosquito net for windows? 

You make a mosquito net for windows by cutting mesh larger than the opening and fixing it to a frame or to the window reveal. Measure the opening, choose a fine mesh, and hold the fabric taut so it does not sag into the room. Seal the edges with spline in a groove, tape, or a magnetic strip so no insect can pass. 

### What mesh size stops mosquitoes? 

A mesh size fine enough to stop mosquitoes has openings smaller than the body of the insect, so the weave must be tight. Standard insect netting sold for windows is woven for this purpose, and a finer mesh blocks smaller insects at the cost of airflow. Check the mesh specks against the insects you see at the window before you buy. 

### Is a magnetic screen option easier than a fixed frame? 

A magnetic screen option is easier to remove than a fixed frame because the panel lifts away for cleaning or storage. The magnet strips hold the mesh against the window surround and let you open the sash without tools. A fixed frame is more rigid and seals better against wind, so the choice depends on how often you open the window. 

### What tools do I need to build a window insect screen? 

Building a window insect screen needs a tape measure, a fine saw for frame pieces, and a spline roller to press the cord into the groove. A dull knife trims the mesh, and corner pieces join the frame without cutting angles. Cutting frame material to length and pressing spline both call for care, so practice on a spare piece first.
