# Angle Measurement Tools: Types and Names

A plain guide to angle measurement tools, from protractor-style gauges to clinometers and inclinometers, including how a tool reads an angle of elevation.

Angle measurement tools are instruments that read how far one line or surface tilts away from another, and they carry names that describe how they do it. A protractor-style angle gauge reads a drawn corner, while a clinometer or inclinometer measures tilt in the field. An angle of elevation is simply the upward tilt from your eye to a high object, and a sighting tool is what makes that reading possible. 

- An angle finder reads the opening between two lines or surfaces, often on a marked scale.
- A clinometer measures tilt, and an inclinometer does the same job in a fixed or portable housing.
- An angle of elevation tool reads the upward angle from the horizon to a high object.
- A sighting tool lines your eye up with the target before you read the scale.
- A protractor-style angle gauge suits flat work on paper or a bench, not distant targets.
 

## What an angle measurement tool does 

An angle measurement tool compares the direction of one line with another and reports the difference in degrees. The tool holds a reference edge against a surface or a line of sight, and a scale shows the size of the opening. Reading an angle is therefore a matter of aligning the tool and then looking at the mark it points to. 

Two families of angle measurement tool cover most needs, and they differ in what they hold steady. A contact tool rests on the two surfaces and reads the corner between them. A sighting tool stays at your eye and reads the direction of something far away, which cannot be touched. 

The scale matters as much as the shape, because the numbers tell you what the reading means. A semicircular scale reads from zero along a flat edge up to a straight line. A full circular scale reads all the way around, which helps when a surface can tip past vertical. 

## Reading a protractor-style angle gauge 

A protractor-style angle gauge is the familiar half-disc with degree marks, and it reads the corner between two straight edges. You place the flat baseline along one edge and turn the gauge until the second edge crosses the scale. The mark at the crossing gives the angle between the edges. 

Many angle finders take this shape but add a hinged body, so the tool follows a corner that is not on paper. The two arms sit against the surfaces, and the scale at the hinge reports the opening. A locking screw holds the arms while you lift the tool to read it. 

A protractor-style angle gauge works well on a bench, a drawing or a joint that you can reach. It gives a poor reading on a distant object, because the arms must touch the surfaces that form the angle. For a roof, a tree or a hilltop, a sighting tool does the job. 

## Clinometer and inclinometer names 

A clinometer is an instrument that measures the tilt of a line of sight above or below the horizontal. The name comes from the Greek word for slope, and the tool reports that slope as an angle in degrees. Field workers use a clinometer to judge the height of a tree, a slope or a structure without climbing it. 

An inclinometer measures the same kind of tilt but often in a fixed housing, such as a sensor inside a machine. The two names describe one job with different bodies, and a portable inclinometer can look much like a clinometer. An angle finder with a weighted pointer and a degree scale is a simple form of either. 

Modern digital versions of a clinometer show the angle on a screen and hold the reading at the press of a button. A bubble or a pendulum inside the tool keeps the reference level steady while you aim. The scale and the reference together decide whether the number means tilt from horizontal or tilt from vertical. 

## The angle of elevation tool 

An angle of elevation tool measures the upward angle between a level line and your line of sight to a high object. You first set the tool level, then tilt it until the sight line meets the top of the target. The scale reports how far you raised the sight line, and that figure is the angle of elevation. 

The same tool reads a downward angle when you aim at something below you, and that reading is called the angle of depression. Both readings depend on a true horizontal reference, so the leveling step matters more than the aim. A sighting tool with a level bubble and a degree scale covers both cases. 

An elevation angle tool does not give height by itself, because the reading is an angle and not a distance. Height follows only when you also know how far you stand from the target and do the geometry. The angle is the input, and the distance is the second input that makes the answer possible. 

## How a sighting tool lines up a target 

A sighting tool is the part of an angle instrument that puts your eye, the tool and the target on one line. A notch and a bead, a small tube or a folded mirror can serve as the sight. You look through the sight, bring the target into the center and then read the scale. 

A mirror sight lets you see the target and the scale at the same time, which reduces the error from moving your head. The mirror reflects the bubble or the pointer, so the level and the aim stay visible together. This design suits a clinometer that you hold at arm's length. 

Steady hands help, but a monopod or a small tripod helps more when the target is far away. Any shake in the sight moves the reading, and a support removes that shake. Set the tool on a firm base before you trust a fine scale. 

## Matching the tool to the task 

The task decides which angle measurement tool belongs in your hand, because contact and sighting tools answer different questions. Flat work on a drawing or a joint calls for a gauge that rests on the surfaces. A distant object calls for a sighting instrument with a level reference and a degree scale. 

A field observer who wants the angle to a treetop or a bird on a wire needs a clinometer with a clear sight. A craft worker who wants the corner of a frame needs an angle finder with arms that follow the joint. Buying one tool for both jobs leads to poor readings on one of them. 

A digital readout helps in dim light or when the scale is hard to see, and a plain scale needs no battery. A locking arm helps on a joint that you must carry to another place. Each feature adds weight and cost, so pick the ones the task truly needs. 

- Protractor-style angle gauge for flat corners and drawings.
- Hinged angle finder for joints you can reach.
- Clinometer with a sight for tilt to a distant target.
- Inclinometer in a fixed housing for machine or structure tilt.
- Sighting tool with a level bubble for angle of elevation.
 

## Keeping a reading trustworthy 

A trustworthy angle reading starts with a known reference, because every angle is measured against something. Check that the tool sits level or flush before you read the scale. A tool that starts off level reports an error that carries through the whole measurement. 

Read the scale straight on, with your eye at the same height as the mark, to avoid a parallax error. Parallax is the shift you see when a pointer appears to move against a scale from an angle. A mirror sight or a digital display removes much of that shift. 

Record the angle with the reference you used, since tilt from horizontal and tilt from vertical are different numbers. Note whether the reading is up or down, because an elevation and a depression share a scale but not a sign. A written note next to the figure prevents later confusion. 

## Questions about angle measurement tools 

### What is an angle measurement tool called? 

An angle measurement tool goes by several names that describe its shape or its job. A protractor-style angle gauge reads flat corners, an angle finder follows a joint, and a clinometer or inclinometer reads tilt. The name on the tool usually tells you whether it touches the surfaces or sights a distant target. 

### Which tool measures an angle of elevation? 

A clinometer with a sight and a level reference measures an angle of elevation. You level the tool, aim the sight at the top of the target and read the degrees on the scale. An inclinometer built into a housing does the same job when the housing is held level. 

### What is the difference between a clinometer and an inclinometer? 

A clinometer is a portable instrument for measuring the tilt of a line of sight, and an inclinometer measures tilt in a fixed housing or as a sensor. The two names describe one measurement with different bodies. A handheld tool with a pendulum and a degree scale can fairly be called either. 

### Can a protractor measure the angle to a tall tree? 

A plain protractor cannot measure the angle to a tall tree, because it must rest on the surfaces that form the corner. A tree stands far away, and there is no second edge to lay the tool against. A sighting tool such as a clinometer is the instrument for that reading. 

### What else do I need besides the angle to find a height? 

The angle alone does not give a height, because it describes direction and not distance. You also need the horizontal distance from your position to the base of the object. With the angle and that distance, the height follows from simple triangle geometry. 

### Does a sighting tool need a tripod? 

A sighting tool does not strictly need a tripod, but a steady support improves a fine reading. Any shake at the sight moves the pointer on the scale. A monopod or a small tripod removes that shake when the target is far away.
